Linear Motion Guide

Product Details:

MISUMI's linear guides are made by Suruga Production Platform. An extensive lineup is available, including miniature to medium/heavy-load types

Additional Information:

• Delivery Time: 1 week

Product Details:

Linear dynamic system with its extensive application scopes and use patterns has different design requirements. Besides, linear guide way lifetime, based on various kinds of parameters, such as, use load and speed, design size etc., with indefinite reference factors, causes troubles for users.Therefore, standard selection flows may avoid specification errors and time cost, and follows are selection steps recommended by STAF

Product Details:

Roller Linear Guide Type

LGD Standard type, LGD12E Economy type.

LGD12XL Heavy load type, Contains 8 roller bearings.

Product Details:

MSA Series - Heavy Load Type
(MSA-A/MSA-LAMSA-E/MSA-LEMSA-S/MSA-LS)

MSB Series - Compact Type
(MSB-TE/MSB-EMSB-TS/MSB-S)

MSR Series - Full Roller Type
(MSR-E/MSR-LEMSR-S/MSR-LS)

MSC.MSD Series - Miniature Type
(MSC-M/MSC-LMMSD-M/MSD-LM)

SME Series - Ball Chain Type
(SME-EA/SME-LEASME-EB/SME-LEBSME-SA/SME-LSASME-SB/LSB SME-SV/LSV)

SMR Series - Roller Chain Type
(SMR-E/SME-LESMR-S/SME-LS)

Product Details:

INA Linear ball Guide Ways
KWVE:- four-row; design with anti-corrosion protection possible

• KWVE..-B:- standard carriage, four-row, full complement ball set
• KWVE..-B-L:- long carriage, four-row, full complement ball set
• KWVE..-B-H:- high, narrow carriage, four-row; corrosion-resistant design possible
• KWVE..-B-HL:- high, narrow, long carriage, four-row; corrosion-resistant design possible
• KWVE..-B-EC:- short carriage, four-row; corrosion-resistant expanded interchangeability
• KWVE..-B-ESC:- narrow, short carriage, four-row, full complement ball se
• KWVE..-B-N:- low carriage, four-row; corrosion-resistant design possible
• KWVE..-B-NL:- low, long carriage, four-row; corrosion-resistant design possible
• KWVE..-B-S:- narrow carriage, four-row; corrosion-resistant design possible
• KWVE..-B-SL:- narrow, long carriage, four-row; corrosion-resistant design possible
• KWVE..-B-SN:- narrow, low carriage, four-row; corrosion-resistant design possible
• KWVE..-B-SNL:- narrow, low, long carriage, four-row; corrosion-resistant design possible
• KWVE..-B-HS:- standard carriage, High Speed design, four-row, full complement ball set
• KWVE..-B-N-HS:- low carriage, High Speed design, four-row, full complement ball set
• KWVE..-B-H-HS:- high, narrow carriage, High Speed design, four-row, full complement ball
• KWVE..-B-S-HS:- narrow carriage, High Speed design, four-row, full complement ball set
• KWVE..-B-SN-HS:- narrow, low carriage, High Speed design, four-row, full complement ball

Product Details:

• NSK LA series Linear Guides
• NSK PU series Miniature Linear Guides
• NSK PE series Miniature Linear Guides
• NSK V1 Series Linear Guides
• NSK L1 series Linear Guides
• NSK RA series Linear Roller Guides
• NSK RB series Linear Roller Guides
• NSK LH series self-aligning Linear Guides
• NSK LS series self-aligning Linear Guides
• NSK S1 Series less noise Linear Guides
• NSK LW Series wide rail Linear Guides

• NSK Nut Cooling Ball Screws
• NSK Comapct FA Series Ball Screws
• NSK A Series Ball Screws
• NSK S series Ball Screws
• NSK HTF-SRC Series Ball Screws
• NSK V1 BSS Series Ball Screws
• NSK HMC Series Ball Screws

• NSK Mono Carrier Mcm Series Actuators
• NSK Mono Carrier Mch Series Actuators

• NSK Mega Tourque Motor Ps Series
• NSK Mega Tourque Motor Pn Series

• NSK Greases
• NSK Angular Contact Ball Bearing For Ball Screw Support

Product Details:

Hiwin Linear Guide Ways

Item Code: Linear-guide-ways

Hiwin Linear Guide Ways

• Hiwin WE Series Linear Guide (WE Series – Four Row Wide Rail Type Linear Guideway)
• Hiwin HG series Heavy Load Ball Type Linear Guideway
• Hiwin EG Series Linear Guide EG series – Low Profile Ball Type Linear Guideway
• Hiwin PG Series Linear Guideway – Hiwin Positioning Guideway
• Hiwin E2 Series Self lubrication Kit for Linear Guideway
• Hiwin QH series with SynchMotion
• Hiwin RG Series High Rigidity Roller Type Linear Guideways
• Hiwin MG Series Miniature Linear Guideways
• Hiwin SE Series

 

Product Details:

   

Product Details:

ABBA Linear is Taiwan Professional Linear Motion Manufacturer which can provide total solutions for Linear guides,Balls crews, Self-Lubricated Linear Ball 

Product Details:

IKO Linear Guide ways

Roller Type Linear Motion Rolling Guides
C-Lube Linear Roller Way Super MX
C-Lube Linear Way IKO MLV
C-Lube Linear Way IKO ML
C-Lube Linear Way IKO ME
C-Lube Linear Way IKO MH
C-Lube Linear Way IKO MUL
Linear Roller Way Super X

IKO LWHD Series

IKO LWHT Series

IKO LWH Series

IKO LRX Series

IKO LRXG Series

IKO LWESC Series

IKO LWES Series

IKO LWETC Series

IKO LWET Series

IKO LWE SL Series

IKO LWLML Series

IKO LWLGLMC Series

IKO LMF Series

IKO LMFC Series

IKO Anti-Creep Cage Crossed Roller Way H
IKO Crossed Roller Way
IKO Precision Linear Slide Unit
IKO Linear Bushing
IKO Miniature Linear Bushing
IKO Stroke Rotary Bushing
IKO Miniature Stroke Rotary Bushing
IKO Flat Cage

Product Details:

SCHNEE Berger Roller-Monorail MR

• High rigidity, great dynamic and static load carrying capacity, outstanding running smoothness and the total enclosure of the carriage are the main features of the MONORAIL guideway. These properties result in higher machining rates while enhancing geometrical accuracy and surface quality of the machined workpieces. MONORAIL provides improved vibration behavior, smaller vibration amplitudes and thus extends tool life. Monorail MR is a cost-effective anti-friction guideway which meets the challenge presented by modern machine design

SCHNEE Berger Roller-Monorail MR

• SCHNEEBERGER‘s MONORAIL BM ball guideway features excellent dynamic properties and many commercial benefits. Designed with a small number of cleverly arranged components, it provides for excellent running properties due to the small number of transitions in the ball tracks, which lead to very quiet running, low pulsation and low friction as well as high travel speeds.

Schneeberger Stainless steel Ball-Monorail BM WR / BM SR

• SCHNEEBERGER‘s MONORAIL BM WR / BM SR systems are linear bearings made from corrosion-resistant steel and based on the MONORAIL BM ball profile guideway. They have been specially developed to meet requirements that are beyond the limits of what conventional coatings on linear bearings can cope with. This is often the case, for example, in processes where corrosion has a negative impact on conveying the products.

Schneeberger Monorail BZ toothed rack systems

• Schneeberger ‘s Monorail BZ systems are high-precision linear guide systems with integral rack drive, based on the company‘s proven MONORAIL BM profile guideways with balls. The benefits resulting from the integration of a profile guideway and an extremely precise rack drive mainly come into their own in the handling and automation industries, in laser and water-jet cutting tools as well as in woodworking machines.

Schneeberger Monorail AMS 3B distance measuring system for MR

• The MONORAIL AMS 3B is an integrated magneto-resistive measuring system based on the MONORAIL MR roller profile guideway. AMS 3B is available in both analog and digital versions. The AMSA 3B analog version has a voltage interface of 1 Vss for connection to all standard control systems, and forms the basis for the AMSD 3B digital version.

Schneeberger Monorail AMS 4B distance measuring system for BM

• The MONORAIL AMS 4B is an integrated magneto-resistive measuring system based on the MONORAIL BM ball profile guideway. In measuring terms, the AMS 4B is the same as the AMS 3B; it offers the same performance in terms of assembly, cost savings, accuracy and process reliability.

Schneeberger Monorail AMSABS 3B absolute distance measuring system for MR

• The MONORAIL AMS 3B is an integrated magneto-resistive measuring system based on the MONORAIL MR roller profile guideway. AMS 3B is available in both analog and digital versions. The AMSA 3B analog version has a voltage interface of 1 Vss for connection to all standard control systems,

Schneeberger Monorail AMSABS 4B absolute distance measuring system for BM

• The AMSABS 3B is based on the MONORAIL MR roller profile guideway, while the AMSABS 4B is based on the MONORAIL BM ball profile guideway. The AMSABS features an absolute interface for connection with SSI controllers, SSI+SinCos controllers and all FANUC controllers.

Schneeberger Monorail AMSA 3L integrated, modular distance measuring system for long axes

• The MONORAIL AMSA 3L is an integrated magneto-resistive measuring system based on the Monorail MR roller profile guideway with an analog voltage interface.

Product Details:

Thomson’s huge offering of linear slides was developed into a very useful online sizing and selection tool, our Linear MOTIONEERING system. This offers a new way to optimize your machine design, save time and, ultimately, help you build a better machine, faster. Easy to use and free,

You enter application parameters for linear slides in five simple steps. Your identified needs are filtered through a comprehensive set of calculations such as linear bearing load/life, ballscrew load/life, and ballscrew critical speed. From that, you are presented with a selection of linear slide products tailored precisely to your application requirements.

And it's easy to select linear slide accessories and motor mounts. Outputs include interactive 3D models, pricing, delivery times and ordering information for our Thomson and IDC brand linear units. Included are the following linear slide product families: 2DB, 2HB, 2RB, MF, MG, MS, TF, and TG.

Product Details:

The RNG linear bearing is a modern, high-performance design and was created through the consistent optimization of the R type bearing. Highly loadable guidance systems with the smallest dimensions can be realized. Through the high performance with comparably small bearing cross-sections, an unrivalled economic efficiency results in many applications.

Accessories: Cage: KBN End pieces: GBN, GCN, GCN-ASpecial Attaching Screws: GDN

Product Details:

• Chain-guided rollers provide travel speeds up to 100 ft/s (30 m/s)
• Bearing mounts self-align in all directions and even allow for slightly out of parallel 60 Case LinearRace ways
• All-steel construction allows operation in temperatures up to 600°F and maximum system rigidity
• Available in single mounts or dual "V" mounts that resist side-loading

Product Details:

The RoundWay bearing combines the high load capacity of hardened and ground steel recirculating rollers with a rigid malleable iron mounting block providing high load capacity with smooth linear travel. The chain-connected rollers allow the RoundWay to travel at extremely high speeds in unforgiving, contaminated environments.

Product Details:

SBI High-load Linear Rail System
SBI-FL/FLLSBI-SL/SLLSBI-HL/HLLSBI-CL/CLLSBI-FVSBI-SV

SBG Standard Linear Rail System
SBG-FL/FLLSBG-SL/SLLSBS-SL/SLL/HL/HLLSBS-FVSBS-SV

SPG, SPS Low Noise Linear Rail System
SPG-FL/FLLSPG-SL/SLLSPS-SL/SLL/HL/HLLSPS-FVSPS-SV

Miniature Linear Rail System
SBM/SBML SBMW

Cross Roller Guide SCVR Type
Cross Roller Table SCVRT Type

Product Details:

Product Description

High load capacity and reduced deflection telescopic rails with caged balls bearings. The telescopic guides have optimal running properties due to inductively hardened raceways. TELESCOPIC RAIL linear slides exhibit little deflection while under very heavy loads, even when fully extended.

• Telescopic guides come in eight different series (ASN, DE, DS, DSC, DBN, DMS, DSE) 
• Torsionally rigid intermediate elements with S-shaped, double-T, or squared sections
• Over-extending, full or partial telescopic strokes are available
• In the DMS63 Series the supported load can reach 3800 kg per pair
• Extremely low deflection and smoothness of movement even in high load, 24/7 applications
• Some Series can be locked in the closed position
• Special versions and strokes available upon request

The Telescopic Rail product family includes full or partial extraction telescopic rails, and consists of eight (8) different sizes. The deflection resistant central components are available in the S, double T or square versions. All series components offer a high load capacity, a minimum deflection and a sliding travel with no play, even under maximum load and when the rails are fully extended. The fixing holes are positioned at a standard pitch.

The products of the Telescopic Rail family are:

ASN - Partial extension consisting of a guide rail and a slider.

DE - Full extension telescopic guides consisting of two guide rails, mounted together to form the intermediate element, and two sliders, which act as a fixed and movable element.

DS - Full extension telescopic guides consisting of two guide rails made of fixed and movable element and an S-shaped intermediate element.

DSC - Full extension telescopic guides consisting of a compact and rigid intermediate element that connects two different sized guide rails with each other as a fixed and moving element.

DBN - Full extension telescopic guides consisting of two guide rails, which act as both fixed, and movable element, and two sliders mounted together form the intermediate element.

DMS - Heavy load telescopic guides consisting of elements from the ASN series and an extremely rigid double-T profile as intermediate element.

DSE - Telescopic rail with a 150% extension of it’s length, made by four elements.

Main fields of application for Telescopic Rail telescopic guides:

• Railway
• Automotive
• Aerospace
• Food & Beverage
• Packaging
• Logistics
• Industrial machinery

Key Features
Safe solutions with locking and damping systems
Suitable for automation with rack and pinion synchronization available

 

Low deflection due to sturdy profiles

 

 

Technical features

• Available sizes for telescopic guides series ASN / DE: 22, 28, 35, 43, 63
• Available sizes for telescopic guides series DS: 28, 35, 43, 63
• Available sizes for telescopic guides series DSC: 43
• Available sizes for telescopic guides series DBN: 22, 28, 35, 43
• Available size for telescopic guides series DMS: 63
• Available sizes for telescopic guides series DSE: 28, 35, 43, 63
• Induction hardened raceways
• Rails and sliders made of cold-drawn roller bearing carbon steel
• Balls made of hardened roller bearing carbon steel
• Max. operating speed: 0.8 m/s ( 31.5 in/s ) ( depending on application )
• ASN, DE, DBN, temperature range: -20 °C to +170 °C (-4 °F to +338 °F ), DS, DSC: -20 °C to +110 °C (-4 °F to +230 °F )
• Electrolytic galvanized as per ISO 2081, increased anticorrosive protection on request

Product Details:

Product Description

Versatile and innovative curved linear guides with radial ball bearing rollers. The curvilinear guides are available in different versions, with constant or variable radius. CURVILINE is ideal for applications such as curved machine housings, door systems in trains or boats, or customized packaging units.

• Two rail widths: 16mm and 23mm
• Zinc plated rails and sliders as per ISO 2081
• Strokes over 3,000mm
• Straight and curved paths in one rail
• Sliders with four rollers, arranged in pairs, maintain the preload over the whole length of the rail
• Parts as per drawing, customized for each application

The Curviline linear guides product family is used for all non-linear motion applications. The linear rails are available in two widths, and made to fit the customer’s design. A single rail can have both curved and straight sections.

Main fields of application for Curviline linear guides:

• Railway
• Naval
• Packaging
• Food & Beverage

Key FeaturesLong life thanks to hardened raceways

 

Design freedom due to costant and variable radius

 

Anticorrosion

 

Technical features

• Available rail widths: CKR01/CVR01: 16.5 mm (0.65 in) and CKR05/CVR05: 23 mm (0.91 in)
• Max. slider operating speed on the rail: 1.5 m/s (59 in/s) (depending on application)
• Max. acceleration: 2 m/s² (78 in/s²) (depending on application)
• Max. effective length of the rail: 3,240 mm (127.56 in)
• Max. traverse: CCT08: 3,170 mm (124.8 in) and CCT11: 3,140 mm (123.62 in)
• Minimum radius for both sizes: 120 mm (4.72 in).
• Radius tolerance +/- 0.5 mm (0.02 in), angle tolerance +/- 1°
• Temperature range: -20 °C to +80 °C (-4 °F to +176 °F)
• Zinc-plated rail and runner (Rollon Alloy); increased anticorrosion protection on request
• Rail material: C43
• Slider body material: Fe360
• Roller material: 100Cr6
• Roller pins lubricated for life

Additional Information:

• Delivery Time: 2week

Product Details:

Anti Cage Creep The roller cage has a unique roller retaining mechanism to achieve a large effective contact length of the rollers and a short roller pitch interval.

Product Details:

Flat cage assemblies consist of a basic cage made from plastic or metal and a large number of precisely guided rolling elements. Needle rollers provide a minimal con -struction height and optimum load carrying capacity and rigidity whilst cylindrical rollers are less demanding with regard to the connecting structure and have a slightly less rigidity. Balls create the lowest level of friction of all rolling bearings. Flat cage assemblies are designed for use with precision guideways but can also be used directly with customer-specific elements with appropriate raceways.

Product Details:

The N/O linear bearing has been designed for use with needle cages. These anti-friction guide ways are suitable for high-load applications. Together with the closely arrange d needle cage the bearing has a very high rigidity. The SCHNEEBERGER plastic and steel composite cage used in these guides gives less resistance to motion than similar needle cages.

Accessories: Cages: SHW, HW End pieces: GFN, GFO, GH, GH-A, GW,GW-A Special Attaching Screws: GD

Product Details: