Call 08046049872 79% Response Rate

Send Enquiry

our range

Wire Straightening Roller

The straightening, consisting of putting the material back into its original shape. The operation is carried out by the first straightening rollers to remove the residual constraint in the material, due to the winding on the bobbin. This operation is performed by the rollers located in the central part of the straightener.The forming of the wire carried out by the last rollers on the straightener, generally placed at an angle of 90°compared to the angle of the first rollers.Often it is necessary to combine these three steps. That is the reason why the straightener uses 5, 7, 9, 11 or even 13 rollers placed in two planes. 

The manufacturing precision of the roller has a major influence on the quality of the final product (wires) as well as on the service life of the rollers. It is therefore essential that the rectified "V" notch on the outer ring has the same geometric characteristics and precision as the rest of the bearing

Grinding this notch on an assembled standard bearing is risky, as the bearing may be damaged. An acceptable uniformity and geometrical precision can thus not be guaranteed. The service life of the roller is much shorter and the quality of wire drawing suffers accordingly. Among numerous applications using thread guides and straightening rollers.

Field of Application: 

The straightening of cables, strips and wires is performed in steps with successive stages until the final product is obtained. To rationalize the handling between the different steps the material is stocked on reels or on bobbins and takes forms which are not natural. For every production step, it is therefore necessary to carry out the inverse process by taking the material off its support. At that moment, the straightening operation takes place. It may be divided into three steps: 

■The following machines use the same type of special rollers:

• Machine tools for fiberglass cables (lawn mowers)

• Machines for spring manufacturing

• Machines for metal wires

• Machines for spooling, un-spooling and rewinding

• Fine and high precision wire drawing

  • SD Type Wire Straightening Roller
  • SD Type Wire Straightening Roller
  • SD Type Wire Straightening Roller
  • SD Type Wire Straightening Roller
SD Type Wire Straightening Roller

SD Type Wire Straightening Roller

Rs 500  / PieceGet Best Price

Minimum Order Quantity: 2 Piece

Product Brochure

Wire Diameter2.5 mm
Usage/ApplicationIndustrial
Suitable ForBearing Steel
BrandCHINA
Packaging SizeEACH
Model Name/NumberSD30, SD31, SD32, SD35, SD40, SD52, SD62, SD72, SD80
Weight250 Grams
The straightening, consisting of putting the material back into its original shape. The operation is carried out by the first straightening rollers to remove the residual constraint in the material, due to the winding on the bobbin. This operation is performed by the rollers located in the central part of the straightener.The forming of the wire carried out by the last rollers on the straightener, generally placed at an angle of 90°compared to the angle of the first rollers.Often it is necessary to combine these three steps. That is the reason why the straightener uses 5, 7, 9, 11 or even 13 rollers placed in two planes.  

The manufacturing precision of the roller has a major influence on the quality of the final product (wires) as well as on the service life of the rollers. It is therefore essential that the rectified "V" notch on the outer ring has the same geometric characteristics and precision as the rest of the bearing. 

Field of Application: 

The straightening of cables, strips and wires is performed in steps with successive stages until the final product is obtained. To rationalize the handling between the different steps the material is stocked on reels or on bobbins and takes forms which are not natural. For every production step, it is therefore necessary to carry out the inverse process by taking the material off its support. At that moment, the straightening operation takes place. It may be divided into three steps: 

The following machines use the same type of special rollers:

• Machine tools for fiberglass cables (lawn mowers)

• Machines for spring manufacturing

• Machines for metal wires

• Machines for spooling, un-spooling and rewinding

• Fine and high precision wire drawing

 



Additional Information:

  • Delivery Time: Ready Stock

View Complete details

get quote request a call back
  • Wire Guide and Straightening Rollers
  • Wire Guide and Straightening Rollers
  • Wire Guide and Straightening Rollers
  • Wire Guide and Straightening Rollers
  • Wire Guide and Straightening Rollers
Wire Guide and Straightening Rollers

Wire Guide and Straightening Rollers

Rs 1,000  / PieceGet Best Price

Minimum Order Quantity: 18 Piece

Product Brochure

Material of RollerMild Steel
MaterialMS
Packaging TypeBox
ColorBlack
Usage/ApplicationIndustrial
Country of OriginMade in India

The straightening of cables, strips and wires is performed in successive stages until the final product is obtained. During the drawing process, abnormal forces and stresses accumulate in the material as it is wound and stocked on reels or bobbins. For every production step, it is therefore necessary to carry out the inverse process by taking the material off its support and re-straightening/de-stressing it. It is at these moments that a quality straightener roller assembly is needed. The straightener assembly carries out three important functions:

View Complete details

get quote request a call back
  • SS Type Wire Straightening Roller
  • SS Type Wire Straightening Roller
  • SS Type Wire Straightening Roller
SS Type Wire Straightening Roller

SS Type Wire Straightening Roller

Rs 500  / PieceGet Best Price

Product Brochure

Wire Diameter2.5 mm
Usage/ApplicationIndustrial
Suitable ForBearing Steel
BrandChina
Packaging SizeTube Packing
Model Name/NumberSS 7, SS10, SS13, SS16, SS17, SS19
The process of straightening cables, strips, and wires involves multiple stages until achieving the final product. As these materials are wound and stored on reels or bobbins during the drawing process, they accumulate abnormal forces and stresses. Consequently, for each production phase, it becomes essential to reverse this process by removing the material from its support and re-straightening/de-stressing it. This critical juncture underscores the necessity of a high-quality straightener roller assembly.

View Complete details

get quote request a call back
  • A Series Wire Straightener Roller
  • A Series Wire Straightener Roller
  • A Series Wire Straightener Roller
  • A Series Wire Straightener Roller
  • A Series Wire Straightener Roller
A Series Wire Straightener Roller

A Series Wire Straightener Roller

Rs 500  / PieceGet Best Price

Product Brochure

Wire Diameter2.5 mm
Usage/ApplicationIndustrial
Suitable ForBearing Steel
BrandChina
Packaging SizeEach
Model Name/NumberA507ZZ - A15002RS
Weight250 Grams

The straightening, consisting of putting the material back into its original shape. The operation is carried out by the first straightening rollers to remove the residual constraint in the material, due to the winding on the bobbin. This operation is performed by the rollers located in the central part of the straightener.The forming of the wire carried out by the last rollers on the straightener, generally placed at an angle of 90°compared to the angle of the first rollers.Often it is necessary to combine these three steps. That is the reason why the straightener uses 5, 7, 9, 11 or even 13 rollers placed in two planes.  The manufacturing precision of the roller has a major influence on the quality of the final product (wires) as well as on the service life of the rollers. It is therefore essential that the rectified "V" notch on the outer ring has the same geometric characteristics and precision as the rest of the bearing. 

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES